AT FCG2 Foot Crank Generator and Power Supply
AT FCG2 Foot Crank Generator and Power Supply
The foot crank generator is used for supplying AC power in remote locations for portable communication/electronics equipment. The system is supplied with a generator unit, 12V DC Storage battery, DC to AC invertor and interface cables with a bicycle support mechanism.
Technical Performance
| Generator Specification | |
| Output Power | 120Watt |
| Output Voltage | 15V |
| Output Current | 8A |
| Invertor Specifications | |
| DC Output | 9.5 – 13.5 V DC |
| AC Output | 210-230V AC |
| Max output power | 100Watts |
| Storage Battery | 12V 12AH |
| General Specifications | |
| Generator Dimensions | 170mm x 143mm x 96mm |
| Bicycle Support Frame Dimensions | 600 x 460 x 150 (folded) |
| Generator Weight | 4.5Kg |
| Bicycle Support Frame Weight | 8Kg |
| Invertor Weight | 5Kg |
| Safety Mechanism | Over current and over voltage protection |
| Bicycle Frame max load capacity | 100Kgs |
Simple Operational Setup
- Assemble Bicycle Support frame
- Affix Generator and Inverter to mounting points
- Attach pedals to cranking arms
- Position unit on firm base
- Connect Interface cable to battery terminals
- Apply consistent pressure to both pedals at approx 60rpm