AT FCG1 Foot Crank Generator
AT FCG1 Foot Crank Generator
The foot crank generator is used for charging 12V Batteries. Included in the package is one generator unit, interface cable and bicycle support mechanism.
Technical Performance
| Output Power | 120Watt |
| Output Voltage | 15V |
| Output Current | 8A |
| Generator Dimensions | 170mm x 143mm x 96mm |
| Bicycle Support Frame Dimensions | 600 x 460 x 150 (folded) |
| Generator Weight | 4.5Kg |
| Bicycle Support Frame Weight | 8Kg |
| Safety Mechanism | Over current and over voltage protection |
| Bicycle Frame max load capacity | 100Kgs |
Simple Operational Setup
1. Assemble Bicycle Support frame
2. Affix Generator to mounting points
3. Attach pedals to cranking arms
4. Position unit on firm base
5. Connect Interface cable to battery terminals
6. Apply consistent pressure to both pedals at approx 60rpm